home For a beginner A tripod for a phone - what it is, what it looks like, why it is used, features of different types. We make a tripod for the phone Tripod at home

A tripod for a phone - what it is, what it looks like, why it is used, features of different types. We make a tripod for the phone Tripod at home

Many of us like to take pictures with our smartphones. Today, some smartphones are equipped with cameras that are in no way inferior to digital cameras, which means that such smartphones can be used for not only taking selfies, but also for more serious photos.

It is known that the quality of photography largely depends on the stillness of the lens. To ensure this immobility and fix the lens in one position, tripods have been created that can be purchased in stores or ordered online. However, high-quality tripods cost a lot of money, and cheap tripods cannot provide a long and faithful service. So the best option will manufacture a tripod with his own hands and conscientiously.

First of all, we suggest watching the homemade video, and then try to repeat the assembly process

So, to create a tripod for mobile phone well, we need:
- Fastening from an old table lamp;
- Wooden bars;
- PVC pipe;
- Phone holder (you can use an old car holder).

First of all, we draw wooden bars through sandpaper to give them a smooth look.

The next thing we take is a PVC pipe to a wooden base.

We will need another hole of the same diameter, which we must also make on a small wooden block.

The bar should fit between the mount and the pipe, as we will use it to adjust the tilt of our tripod.

We take another bar, which will be a platform for fastening. We glue this bar to the bar that regulates the slope.

The tripod at this stage is almost ready. We just have to glue the mobile phone holder to the platform bar.

Smartphones are often used for mobile photography. In some cases, it is difficult to obtain high-quality images without a rigid fixation of the camera. A tripod for the phone expands the functionality of the device, allowing you to fix it in the desired position.

What is a phone tripod?

The smartphone stand came into everyday life from the photo and film segments. A tripod for a phone for shooting is a stand that provides reliable installation of the gadget at a specific point relative to the floor and other surface. The task of the support is to stabilize, adjust the camera height, change the angle of inclination. Models of various sizes, designs and types of mounting are telescopic, equipped with flexible legs or on a rigid base, with a holder at a certain height.

What does a phone tripod look like?

The device is a special mobile accessory on three legs. The tripod consists of a base and a head. A smartphone tripod can be compact, full-size or pocket-size. The legs of the latch are fixed in a static position or are adjustable in height. They are equipped with rubberized tips for better grip of the device with different types of surfaces. Some models are equipped with a mechanism that turns them into a selfie stick.

Why do you need a tripod for your phone?

Recently, progress has taken smartphones to the highest level of use. Today, with their help, not only interaction between people takes place, but also high-quality photos and videos are obtained. With the help of a tripod, camera shake is completely eliminated, so high-quality images are obtained. The main advantage of a mobile phone tripod is that it can be placed on any plane, while the camera is directed directly at the object, and the hands remain free.

The device is a necessary accessory when performing delayed shooting and for blogging activities. Additionally, the range of applications for a tripod for the phone includes:

watching video clips and reading books;
communication in applications through video calls;
work in programs that require only viewing content.

Types of tripods for the phone

Devices for mobile shooting are divided into several main groups:

Classic tripod for the phone is a reduced copy of the usual support under reflex camera. It is advisable to use it for indoor work, installing it on the floor, table or cabinet.
Phone tripod with flexible legs has a small height. The gadget does not require a flat surface. It can be attached to a chair leg, fence or tree. The tripod is ideal for photo shoots, but has a minus - the lack of smoothness of movement in the frame.
Universal rack for the phone is equipped with an extended set of functions, connects to smartphones, camcorders, cameras and is able to cope with the most difficult shooting.

Classification of tripods for a smartphone depending on the type of head:

Pan Tilt– limited range of motion with turn and tilt. Functions are adjustable and locked to work individually.
pistol grip- A tripod for the phone helps to set the camera to the desired point without unscrewing the screws.
ball mechanism– any position in space, panoramic photos.

Floor stand for phone

An important accessory for those who often upload photos or videos of the process of working with their own hands. Also, this high phone tripod will be useful for food photographers to create photos in the now very popular flat lay style, because any shooting from above is too tough for him. Such a device is useful in large rooms, such as gyms, dance studios, where there is a minimum amount of furniture, and shooting must be done with your hands free. Legs give several variations in placement height.

Desktop tripod for phone

Eliminate the need to carry bulky accessories with a small tripod for your phone. The tripod stays confidently on its feet with a wide range of installation, fixing the camera in one position helps to take high-quality photos. In addition, some models are equipped with a swivel head, so that the fixed smartphone can be rotated in different directions. A desktop tripod for the phone is an indispensable thing for those who like to take group shots. Thanks to the leg collection function, the device easily transforms into a selfie stick.

Handheld phone tripod

A kind of stand, which, unlike its counterparts, has one point of support. An ideal assistant for those who like to take high-quality selfies. In order to use it, you need to insert a smartphone into a special form and install a communication program. V professional photography A mini tripod for the phone is used when you need to quickly change the angle and location of the shooting. To get high-quality shots, the photographer takes a pose in which his legs turn into missing tripod legs.

Depending on the method of shooting control, the manual stand for a smartphone is divided into the following types:

monopod without buttons;
with bluetooth button on the handle;
with bluetooth remote control;
monopod with wire and button.

Universal tripod for phone

Recently, hybrid variants of stands for smartphones are gaining great popularity. It is convenient when a tripod tripod for the phone easily turns into a compact tripod. In addition, the advantage of the accessory is its compactness, the folded size is similar to a traditional selfie stick. All this makes it the most popular among buyers who are fond of different types of photos and videos.

How to choose a tripod for your phone?

The accessory is purchased taking into account the ratio: quality-functionality-price, depending on the purpose and frequency of its use. When buying a tripod for your phone, you should consider the following parameters:

Tripod with light for phone

The device is necessary for those who shoot video and take photos in poorly lit rooms and at night. In this case, it is impossible to get a good image without an additional light source. A tripod for a phone with a lamp is indispensable when the power of a standard flash of a mobile device is not enough. As an additional light source, LED portable lamps are used, which are mounted behind the scenes around the smartphone.

Flexible phone tripod

Taking pictures with the whole family in the country or capturing a beautiful natural landscape - all this will allow you to take pictures with your phone. The undeniable advantage of the octopus tripod for the phone lies in the wide range of legs. Due to the flexibility of the supports, the smartphone on the stand can be mounted on any surface. If all three legs are bent towards you, you will get a selfie stick, bending at a large angle will turn the legs of the phone stand for shooting into a great handle. The flexible stance can be used as a panoramic arm rig.

Tripod for phone with remote control

The most advanced models of stands for creating photos and videos from your smartphone are equipped with various accessories. One of the most important is the remote control. A professional phone tripod with a small accessory helps you take pictures or direct video while away from the camera. This is especially true in situations where even minimal camera movement is unacceptable, and you need to take several photos at different times. The principle of operation is simple: the accessory is connected via Bluetooth to the phone, and its buttons imitate the keys of a smartphone.

phone tripod rating

Every self-respecting video blogger should have a similar device in his arsenal, which helps not only to take high-quality photos, but also to shoot master classes high level. Photo enthusiasts who do not want to spend money on specialists in the field of photography cannot do without it. Consider which model options can be attributed to the list of the best tripod for the phone.

The best classic tripods:

The best tripods with flexible legs:

The best universal tripods:

DIY phone tripod

High-quality stands are very expensive, so as not to overpay, it is useful to learn how to make a tripod for a phone from improvised means. To do this, you need to have the following tools:

fastening from an old table lamp;
wooden bars;
PVC pipe;
holder for your mobile phone.

The process of making a tripod for a phone consists of the following steps:

Wood is treated with sandpaper.
Legs in the form of narrow pieces of wood are glued to a wide bar.
The PVC pipe is attached to a wooden base.
Next, a hole is drilled in the pipe and a wooden bar for the diameter of the mount.
The bar is placed between the mount and the pipe. This will be a device for adjusting the tilt of a tripod for the phone.
The second piece of wood is a platform for mounting. It is glued to an inclined bar.
Lastly, attach the mobile phone holder.

How to use a phone tripod?

Before you can enjoy simply shooting a photo or video, you need to know how to prepare the camera for this. A tripod for a smartphone is installed and configured, adhering to the following rules:

Caring attitude. If some part does not move easily, no extra effort is needed.
The tripod for the phone must be laid out according to the rules. Start with the legs, pushing the lower tiers apart. They raise their heads.
Spread the legs so that the crossbar is parallel to the floor. For the stability of the structure, it is important that two legs are on the sides, and the front one is directed forward.
In the absence of a level, we set the horizon on any surface located directly.
If necessary, you can turn a tripod for the phone into a monopod, leaving one leg.
Attach the camera and check its tightness.

How to replace a tripod for a phone?

On the one hand, there are a lot of options, because only the camera should remain open, and the entire body can be closed as you like. A simple tree to which you can attach a smartphone can become a primitive tripod for a phone. However, if suddenly there is no such stand, you can use the following options:

Before making an accessory for your smartphone, you need to consider what raw materials to use, because the body of the finished tripod must be strong.

First of all, you need to figure out what tasks the tripod will perform. If you have to use it constantly, then you need to consider which of the materials to choose so that it lasts for a long time. If you plan to use it less often, but want to save money, you can take the raw materials that you always have at home. Let's get down to business.

If you make a wooden stand for a camera or smartphone, it is better to cover it with stain - so it will last a long time.

From plinth for plastic windows

When the glazing in the house is changed to a more modern one, some kind of waste is sure to remain. In this case, we will use them. To begin with, we will prepare all the inventory, so as not to be distracted from work later.

Materials and tools

For work you will need:

plinth from plastic windows;
hacksaw;
drill;
metal tube.

Please note that aged plastic will not work, as it may crack during operation.

Step-by-step instruction

We take the rest of the plastic and cut off from it a part half as large as your smartphone.
Let's prepare the fasteners, on which we drill two holes and insert a screw and a locking ball into them.
Let's measure the diameter of each element for fixing. Then we will attach the prepared plastic and mark where these parts will be.
We make holes on a piece of plinth with the appropriate diameter of the feint and the ball.
Now we fasten the adapter and fix the base of the future tripod to it.
We process the edges of the plastic with electrical tape, adhesive tape or silicone glue so that they do not scratch the phone.
Next, we fasten a long telescopic tube (you can use a regular one), put the smartphone in the connector, and then start shooting.

GOOD TO KNOW!

If you doubt the reliability of the holding device, the phone can be fixed with an elastic band. Use thin and elastic, as for a slingshot.

Adjustable cardboard tripod

It may seem to someone that any cardboard is not able to securely hold the phone while shooting. However, if you do everything according to the instructions, you can get a solid tripod for long shooting.

It is better not to use bare aluminum wire for the construction of coasters. It is better to choose one that has a protective shell.

Materials and tools

To make a cardboard tripod, you will need:

any cardboard box;
scissors;
ruler;
ball pen;
gun glue.

Step-by-step instruction

We will immediately prepare the desktop so that in the process of work we do not waste time searching for inventory. Next, let's start making a tripod.

We cut cardboard box into several parts (you will need three parts measuring 10 × 6 cm).
Now take one part and draw lines on it at a distance of 20 mm from each other. We make four strips and cut off the excess
Now we press each drawn line with a ruler and bend the figure outward. Then we glue the resulting edges together with a gun.
Now we do the same from the second cardboard, only we draw lines at a distance of 16 mm.
Again we push and bend them, we form a figure with a glue gun.
Next, insert the smaller part into the larger one.
We measure the required distance at which the phone should be installed during the shooting and pierce two holes in the cardboard. We insert a latch into them (can be made of paper).
Now, on the edge of the upper fragment of our tripod, we make cuts that will hold the smartphone. Their depth should be at least 1 cm.
Next, we form a stand for a cardboard device. To do this, glue the rest of the box to the prepared tripod with a gun.

As a result of the steps taken, you get a durable homemade tripod with a stand that can be used on the table when taking a selfie or shooting a video.

Plywood smartphone stand

Plywood is one of the wood-based materials. It is used for various purposes. Today we will use such a board for making. For these purposes, you will definitely need a diagram or drawing.

Materials and tools

To create a wooden phone stand, you need to have on hand:

simple pencil;
plywood;
jigsaw.

Step-by-step instruction

Let's prepare the plywood, cut out of it two parts measuring 10.5 × 5 cm and 12 × 5 cm.
Let's grind two fragments, see that there are no burrs on the edges.
We make cutting at a distance of 2-2.5 cm from the side edge of the workpiece. The width of the sawn piece on each part should be no more than 5 mm.
Remember that cuts are carried out approximately to the middle. Next, we connect the two parts together "groove-to-groove".
On a part that has a shorter length, we make a recess with a chisel, then we grind it with sandpaper.
Now we clean our workpiece, and then varnish it or decorate it in an interesting design.
After that, we install our smartphone in the recess and enjoy the result.

From plywood and thin boards, you can make a lot of interesting products in the form of phone stands. If you are creating an accessory for a child, you can use patterns of various animals or colorful geometric shapes as a basis.

Wooden tablet stands

How to make an interesting wooden tripod

Everyone who uses a camera on a smartphone understands that the quality of the picture directly depends on the immobility of the device. The more convenient and secure the phone is on a tripod, the better the image will be.

Materials and tools

wooden bars;
smartphone holder;
fastener from a table lamp;
glue gun;
thin PVC tube.

Step-by-step instruction

First of all, we will prepare all the available bars for processing. To do this, we grind them from all sides to remove irregularities.
Next, take a large bar and glue small ones to it along the edges.
The wide plane will become the basis of our tripod.
Now glue the PVC tube to the prepared bar.
We drill two symmetrical holes with a diameter corresponding to the fastener.
We insert the fixing element, form a small rectangular bar with the same hole, which is subsequently attached to the reacting mechanism.
On top of the resulting bar we glue another one, a little larger. It will serve as a platform.
Now we attach a plastic holder for the phone to the resulting design in a horizontal position.

After the above steps, you can use a homemade tripod as purchased. Such a device can be used at home to shoot full-length video.

Wooden phone stands

How to make a tripod for a phone from improvised materials

Among the variety of tools and materials that can be used to create homemade tripods, there are also options that are always in the house. At this stage, we will burn about such devices.

When the house has holders for folders and papers in in large numbers, they can be used with great benefit for the phone. It is from these devices that we will create a simple tripod.

For a portable stand, we will prepare one large binder and the other smaller.
We open the large fastener, put the handles of the small one in it and slam the structure.
Raise the bottom holder up, then simply place your smartphone on the stand.
Ideally, it would be better to smooth out the edges of the mini tripod to avoid possible scratches on the body of the phone.

GOOD TO KNOW!

Such a device is convenient to carry in your bag, organizer or even in your pocket. Such a gadget will be especially useful for those who work in the office and always keep a cell phone at hand.

Clothespin option

For this purpose, it is advisable to use both plastic and wooden clothespins. However, it is worth noting that the latter will look better, especially if they are decorated in any of the ways. Let's start making the stand.

For the product you will need one ballpoint pen and 5 clothespins.
We fasten all clothespins from the middle to the edge with a cap.
Turn the two extremes in the opposite direction.
The next two (located on opposite sides) are lifted up.
We can assume that the tripod is ready. We install the phone on it and use it as a regular stand or a means for shooting.

In this version of the accessory, you can adjust the tilt of the smartphone.

A tripod from a piece of copper wire

The next homemade version of the stand is more suitable for cameras. It is not difficult to make this accessory, the main thing is to properly prepare all the tools.

We collect the necessary material: silicone tube, copper wire, brass adapters, two bolts, wire cutters, burner, water and dishwashing detergent, epoxy.
We burn the copper wire, observing the safety rules and cool it in water.
We clean the wire with tow, then carefully place it in a silicone tube.
The next step is to put a brass sleeve on the tube, it will serve as a connecting element for the bolt and wire.
Next to the bolt, cut off the hat with a grinder or a metal saw, leaving a 2-3 cm tail.
Next, we screw the resulting part into the adapter and fix it with a glue gun, or better with epoxy. There should be a 0.5 mm part outside the adapter. This will be required for further mounting of the camera.
We fix the opposite side in the same way, only we do not leave the bolt outside.

During use, this device can be wound on tree branches and on any other support in case there is no one nearby, and taking a picture is a matter of prime necessity.

When making accessories for electronics, it is better to take materials with a margin.

Dear users. Ask questions in the comments, tell us if you liked the ideas for creating a homemade tripod. If something is not clear, we will discuss it in priority order.

Stabilizing the camera at the time of shooting is the key to obtaining sharp or clear shots, the hand will not tremble when you press the button and will not spoil the frame. For long exposures, a tripod is a must, without it you won’t get the right picture at all. Static subjects that are far away from the photographer may appear blurry when zooming out without a steady camera position. For all these situations, a tripod is required.

The cost of a good tripod fluctuates around 7-10 thousand rubles for a standard camera, for heavy optics stabilization will be required, here the price will be even higher. It is not always possible to purchase a store option, especially if nature has not deprived you of skill and ingenuity. Then you can make a tripod with your own hands, practically from improvised means. The cost of materials will be many times less, it will take a couple of days in time, and for advanced users who can deftly manage tools, it will take several hours.

When you might need a tripod:

Shooting on long exposure– 100% hard stabilization required;
Shooting at night, in addition to a tripod, a device for remote shutter release can also come in handy;
Sports competitions or work with fast moving objects;
Shooting with background blur;
Photographing at high magnification (zooming), including macro photography;
Portrait and studio shooting involves stabilizing the camera for professional, clear shots;
Shooting architecture and landscapes and many other options.

Tripod- great option for big company when one person always stays behind the scenes in shared photos. Stabilizing the camera at the right height and a remote control (RC) will help to collect the whole company in the photo.

Tripod types

In addition to the standard three-leg stand, there are many different tripods for different purposes and situations. The most popular is the tripod, it is used in all types of filming, except for extreme ones. According to the type of camera mounting or surface mounting, tripods are:

Monopods used to mount the camera and mobile phone to increase the distance from the camera to the subject. Most often used for selfie photos;
tripod– professional equipment with camera mount, has 3 legs or stands. You can adjust the height, tilt, and other parameters;
Multipod- a collapsible tripod, when unwound, a monopod is obtained. Camping version of the equipment;

Mini tripods, or desktop are used less often, but quite convenient and inexpensive. Height approximately 30-40 cm when unfolded.
Fastening on the belt is used for photo and video filming, it is convenient for constant movement;
Tripods-clamps are attached to tables and other surfaces that are inconvenient for outdoor shooting;
Clothespin tripods similar to the previous version, but fastened with a clamping mechanism and a screw;
Flexible tripods- models on rubberized legs, consisting of movable elements. By changing the shape of the legs, the height is adjustable. Compact and convenient models allow you to mount the cameras on almost any surface.

A professional photographer working in different genres and in any conditions there can be a set of tripod mounts. But in most cases, they are used quite rarely and are not essential for shooting walking photo shoots, love-story, weddings and birthdays, and this is exactly what the average photos do 95% of the time.

Tools needed to build a tripod

If you still decide to make a tripod with my own hands then you will need the following tools:

Drill and drills of different diameters;
Saw or hacksaw;
Sandpaper of different grain sizes;
Screwdrivers, pliers, wire cutters (in some cases);
Vices and clamps (in some cases);
Glue and necessary materials.

It is better to perform all work outside or in a special room with good ventilation. Glue and paint have an unpleasant smell, and sawdust and shavings are best left outside the house.

Do-it-yourself tripod from a razor

The easiest tripod to assemble and manufacture will require a couple of hours of your time, a piece of board, glue and 3 regular or floating razors. The main thing is that they are the same. The base is sawn triangular, processed with sandpaper, a hole is cut in the center and a bolt is screwed in and securely fastened with glue. We screw the nut onto the bolt and lay the rubber seal so as not to damage the camera body during mounting. To the side surfaces, or edges of the wooden triangle, razors are glued with a blade to the stand.

Budget desktop tripod is ready. We needed:

A piece of board or plywood;
Bolt of suitable diameter for mounting the camera;
Drill and drill with a bolt diameter;
Nut for bolt;
seal;
Sandpaper;
Glue;
Paint, if desired;
3 razors.

A little patience and a small camera tripod is ready to go.

Option to assemble a tripod from a tennis ball

Another budget option is a tabletop mini tripod made from a tennis ball. To do this, you need a knife, glue, a bolt and a nut. The ball is cut in such a way that most of it is stable on the table, to seal the surface we glue the place under the camera with a second layer from the remaining piece. A hole is made in the center and a bolt is glued. then you can paint the structure or leave it as it is. You can put a seal under the camera, and if you take a longer bolt, you can slightly increase the stand up. For this tripod we needed:

tennis ball;
Bolt with a diameter for mounting on the camera;
Nut and seal on the bolt;
Glue and an hour of time.

This option is not suitable for a serious event, but it is quite suitable for home use with a small camera; of course, it will not hold heavy optics.

Plastic bottle tripod

The easiest option to implement is to use an empty plastic bottle to create a tripod. A hole of the required diameter is drilled in the cover, a bolt is inserted, fastened with a nut, screwed into the chamber thread. The bottle is weighted with sand or pebbles and twisted with a prepared cap. The tripod is ready for use, in field conditions it can significantly save nerves and time, having worked no worse than the purchased one.

Do-it-yourself camera tripod from ski poles

A more complex option will require you to have some skills in using scissors or a hacksaw, a file, a drill, as well as time. The aluminum tube is cut into 3 parts with "ears" for fastening, the parts are processed with a file, holes for the bolts are drilled.

We cut the ski poles into 4 equal parts, they will be the legs of the tripod. For the base, a square piece of board or thick plywood is taken, approximately 10 x 10 cm in size, a hole is drilled in one for a steel tube. In 3 parts of fasteners and “legs” of the tripod, we make holes for the screw at the right angle so that they are in the right position when the structure is assembled.

From the second socket we assemble the mount for the camera.

We connect both parts, install the camera on the screw, the tripod is ready for use.

Thus, we needed to manufacture this design:

2 ski poles;
steel tube;
2 pieces of board or plywood;
a small piece of flattened aluminum tube;
self-tapping screws, or screws, a bolt for the camera;
file, pliers, hacksaw, screwdriver, drill.

It will take at least a couple of hours to make such a design, subject to the skills of working with tools. Suitable even for a medium-weight camera, check the load in advance so that there are no unexpected incidents at the event.

PVC tubing for tripod

Another material for creating a holding device for the camera is metal-plastic tubes used in construction for laying water supply. They bend well, but hold their shape well. You can fasten them together with plastic corners, self-tapping screws, bolts or screws. We assemble the base from pieces of pipe and corner fittings, fasten the vertical tube with an adapter. At the top end we fix the platform for the camera.

Monopod (selfie stick) from improvised materials

If you urgently need to take a selfie, and there is no monopod or selfie stick at hand, then you can use any means at hand to secure the phone. It can be a stick, a branch or a piece of thick wire. It is impossible to create a system for pressing a button under such conditions; we use the delay start function for 2-3 seconds. During this time, we build a frame and get great pictures without buying a tripod.

Stand-adapter for phone

From improvised materials, you can also assemble an adapter from any tripod from the camera to mount the phone. To do this, you need a piece of plastic, for example, a plinth for finishing plastic windows. A part is cut off, a little shorter than the phone, holes are drilled in the right places (corresponding to the fasteners on the latch). The adapter is fastened with nuts to the tripod, the design is ready for use.

Other tripod materials

The listed options for homemade tripods for the camera do not require special skills and knowledge, almost anyone can make them without much effort. In addition to these materials, you can use wooden slats and bars, metal tubes, plastic. But here you will need specialized tools and certain knowledge.

Camera tripod requirements

Regardless of the material and design, a tripod must meet certain requirements and perform functions.

working height. Each tripod has a minimum and maximum height depending on the design of the device. Tripods have the widest range and are therefore the most popular among photographers. Correctly select a tripod for height, it should be slightly higher so that you can shoot from above.
Weight and dimensions. The most important parameter for "field" filming. Professional equipment weighs a lot and is quite difficult to carry with you for a long time. Therefore, for outdoor photo shoots lightweight models are selected. The same applies to the dimensions when folded, bulky tripods remain in the photo studio, and compact and easy to carry are taken for travel.

This parameter depends on many nuances: material, fasteners, design features. For a photographer, the workload is more important - you need to be guided by it when choosing a model for the weight of the camera.

Thread. To attach the camera to a tripod, there are 2 main standard threads - 1/4 ”and 1/8”, the first option is designed for compact models, including “soap dishes”. To work with larger cameras, a 1/8 thread is used. Telephotos, powerful lenses, heavy cameras are mounted on 3/8, it can withstand heavy loads. All this should be taken into account when choosing a tripod for shooting.

Afterword

Whether to make a lens with your own hands or spend a certain amount on equipment is up to each photographer to decide on their own. But there are a few important points:

If homemade equipment were better than professional equipment, it would have ceased to be produced by now;
Experienced photographers with expensive optics will not rely on a "self-made" tripod and will purchase a suitable weight and material for the safety of equipment;
For daily shooting you need a good tripod, from improvised means - for 1 time;
You will still have to spend a certain amount on materials, and time to make a tripod;
Homemade tripods are inconvenient for frequent movements, they are not compact and it is problematic to carry them with you.

Based on these points, it follows that it is better to purchase professional specialized equipment for work. Save on the safety of the camera and optics is not worth it. But for home or very infrequent use, you can assemble a tripod with your own hands.

A tripod is an indispensable thing for those who are fond of shooting video on mobile device. However, a tripod for a phone is not cheap. Of course, the phone can be supported by some book or other object, but this is not practical and inconvenient. Luckily, a good tripod can be made at home with a little bit of work! This article is written about several ways to make a tripod for your smartphone with your own hands.

Simple and inexpensive binder holder

There is a lot of information about this method on the Internet. And all because in order to make such a tripod it will take 1-2 minutes. All you need for this method is two stationery binders, or clips, and a plastic card.

The bottom line is that two binders, preferably large, are attached to the sides of the plastic card. Instead of a plastic card, you can use a playing card, as long as it is dense. After the binders are fixed opposite each other, their legs are bent outward, and the device is inserted into these same legs.

This method is suitable for those who shoot video from ground level, or any other surface. In general, he is not tall.

Clothes hanger tripod

First you need to take three plastic clothes hangers and cut off the lower parts from them. These parts are the legs for the future tripod. Next, you need to cut these legs so that their length is approximately 15 centimeters.

The next step is to measure 2-3 cm from the end of each knife, melt it and bend it at an angle of about 45 degrees. After that, it is necessary to make holes in the bent ends for the screw.

After all that has been done, you need to glue the three legs so that you get a tripod. Glue the bent ends. Next, you need to insert the screw into the holes.

Now you need to make a place for a smartphone. For this, a can cap (from paint, varnish, etc.) is suitable. You just need to turn it over, put it on a screw and make slots for your smartphone. Ready!

Conclusion

In general, there is an incredible variety of ways to make a tripod at home from improvised means. The main thing is to show imagination. For those who do not regularly record, the smartphone can simply be propped up with something. However, for those who regularly shoot with a smartphone, it is recommended to spend money once, but use a good tripod for a long time. By the way, the best smartphone holder is an octopus tripod. It has flexible legs and is not very expensive.

P.S. Very good way- take the holder from the monopod and glue it on top of the lamp with a flexible stand. This design will serve not only as a holder, but also as lighting. It is advisable to seal the light bulb with plain white paper so that the light is diffused and uniform.