Road signs. Signs of special regulations
Road signs that are valid on the roads in 2018:
1.1 "Railway crossing with a barrier".
1.2 "Railway crossing without barrier".
1.3.1 "Single-track railway".
1.3.2 "Multi-track railway".
Designation of a railway crossing not equipped with a barrier: 1.3.1 - with one track, 1.3.2 - with two or more tracks.
1.4.1 - 1.4.6 "Approaching the railway crossing". Additional warning about approaching a railway crossing outside built-up areas.
1.5 "Intersection with the tram line."
1.6 "Crossing equivalent roads."
1.7 "Intersection with roundabout".
1.8 "Traffic regulation". An intersection, a pedestrian crossing, or a stretch of road where traffic is controlled by a traffic light.
1.9 "drawbridge". Drawbridge or ferry crossing.
1.10 "Departure to the embankment". Departure to the embankment or shore.
1.11.1, 1.11.2 "Dangerous turn".
Rounding the road of small radius or with limited visibility: 1.11.1 - to the right, 1.11.2 - to the left.
1.12.1, 1.12.2 - "Dangerous turns".
Section of the road with dangerous turns: 1.12.1 - with the first turn to the right, 1.12.2 - with the first turn to the left.
1.13 "Steep descent".
1.14 "Steep climb".
1.15 "Slippery Road". A section of the road with increased slipperiness of the carriageway.
1.16 "Rough Road". A section of the road that has irregularities in the carriageway (undulations, potholes, uneven junctions with bridges, etc.).
1.17 "Artificial unevenness". A section of road with artificial roughness (bumps) to force a speed reduction.
1.18 "Ejection of gravel". A section of the road where gravel, crushed stone and the like can be thrown out from under the wheels of vehicles.
1.19 "Dangerous roadside". A section of the road where the exit to the side of the road is dangerous.
1.20.1 - 1.20.3 "Narrowing of the road".
Narrowing on both sides - 1.20.1, on the right - 1.20.2, on the left - 1.20.3.
1.21 "Two-way traffic". The beginning of a road section (carriageway) with oncoming traffic.
1.22 "Pedestrian crossing". Pedestrian crossing marked with signs 5.19.1, 5.19.2 and (or) markings 1.14.1 and 1.14.2.
1.23 "Children". Road section near children's institution(school, health camp, etc.), on the roadway of which the appearance of children is possible.
1.24 "Intersection with a bike path."
1.25 "Road works".
1.26 "Cattle drive".
1.27 "Wild Animals".
1.28 "Falling stones". A section of the road where collapses, landslides, falling stones are possible.
1.29 "Sidewind".
1.30 "Low-flying aircraft".
1.31 "Tunnel". A tunnel without artificial lighting, or a tunnel with limited visibility of the entrance portal.
1.32 "Congestion". The section of the road where the congestion has formed.
1.33 "Other hazards". A section of the road where there are hazards that are not covered by other warning signs.
1.34.1, 1.34.2 "Direction of turn". The direction of movement on the rounding of the road of small radius with limited visibility. Detour direction of the repaired section of the road.
1.34.3 "Direction of turn". Traffic directions at a T-junction or fork. Detour directions of the repaired section of the road.
2. Signs of priority
2.1 "Main road". Road on which the right of way of passage of unregulated intersections is granted.
2.2 "End of the main road".
2.3.1 "Intersection with a secondary road."
2.3.2 - 2.3.7 "Adjacency of a minor road".
Adjacency on the right - 2.3.2, 2.3.4, 2.3.6, on the left - 2.3.3, 2.3.5, 2.3.7.
2.4 Give way. The driver must give way to vehicles moving on the intersecting road, and if there is a plate 8.13 - on the main one.
2.5 "Movement without stopping is prohibited." It is forbidden to move without stopping in front of the stop line, and if there is none, in front of the edge of the crossed carriageway. The driver must give way to vehicles moving on the intersected, and if there is a sign 8.13 - on the main road.
Sign 2.5 may be installed in front of a railway crossing or a quarantine post. In these cases, the driver must stop in front of the stop line, and in its absence, in front of the sign.
2.6 "Advantage of oncoming traffic".
It is forbidden to enter a narrow section of the road if it may impede oncoming traffic. The driver must give way to oncoming vehicles located in a narrow area or the opposite entrance to it.
2.7 "Advantage over oncoming traffic."
A narrow stretch of road where the driver has priority over oncoming vehicles.
3. Prohibition signs
Prohibition signs introduce or cancel certain traffic restrictions.
3.1 "No Entry". It is forbidden to enter all vehicles in this direction.
3.2 "Movement prohibited." All vehicles are prohibited.
3.3 "The movement of motor vehicles is prohibited."
3.4 "The movement of trucks is prohibited."
The movement of trucks and vehicles with a permitted maximum weight more than 3.5 tons (if the weight is not indicated on the sign) or with a maximum permitted weight exceeding that indicated on the sign, as well as tractors and self-propelled machines.
3.5 "Motorcycles are prohibited."
3.6 "Movement of tractors is prohibited." The movement of tractors and self-propelled machines is prohibited.
3.7 "Moving with a trailer is prohibited."
The movement of trucks and tractors with trailers of any type, as well as the towing of mechanical vehicles, is prohibited.
3.8 "The movement of horse-drawn carts is prohibited."
The movement of horse-drawn carts (sleighs), riding and pack animals, as well as the driving of livestock is prohibited.
3.9 "Biking is prohibited." Bicycles and mopeds are prohibited.
3.10 "Pedestrian traffic is prohibited."
3.11 "Weight limitation".
It is forbidden to move vehicles, including vehicles, the total actual mass of which is more than indicated on the sign.
3.12 "Weight limit per axle vehicle».
It is forbidden to move vehicles whose actual weight on any axle exceeds that indicated on the sign.
3.13 "Height limitation".
The movement of vehicles whose overall height (with or without cargo) is more than indicated on the sign is prohibited.
3.14 "Width limitation". The movement of vehicles whose overall width (with or without cargo) is greater than that indicated on the sign is prohibited.
3.15 "Length limitation".
The movement of vehicles (vehicle combinations) whose overall length (with or without cargo) is greater than that indicated on the sign is prohibited.
3.16 "Minimum distance limitation".
The movement of vehicles with a distance between them less than indicated on the sign is prohibited.
3.17.1 "Customs". It is forbidden to travel without stopping at the customs (checkpoint).
3.17.2 "Danger".
The further movement of all vehicles without exception is prohibited in connection with a traffic accident, accident, fire or other danger.
3.17.3 "Control". Passing through checkpoints without stopping is prohibited.
3.18.1 "No right turn".
3.18.2 "No left turn".
3.19 No U-turn.
3.20 "Overtaking prohibited".
It is forbidden to overtake all vehicles, except for slow-moving vehicles, horse-drawn carts, mopeds and two-wheeled motorcycles without a sidecar.
3.21 "End of no overtaking zone".
3.22 "Overtaking by trucks is prohibited."
Trucks with a maximum authorized mass of more than 3.5 tons are prohibited from overtaking all vehicles.
3.23 "End of the no-overtaking zone for trucks".
3.24 "Maximum speed limit".
It is forbidden to drive at a speed (km/h) exceeding that indicated on the sign.
3.25 "End of the maximum speed limit zone."
3.26 "Sounding is prohibited."
It is forbidden to use sound signals, except when the signal is given to prevent a traffic accident.
3.27 "Stopping prohibited." Stopping and parking of vehicles is prohibited.
3.28 "Parking prohibited." Parking of vehicles is prohibited.
3.29 "Parking is prohibited on odd days of the month."
3.30 "Parking is prohibited on even days of the month."
With the simultaneous use of signs 3.29 and 3.30 on opposite sides of the carriageway, parking is allowed on both sides of the carriageway from 19:00 to 21:00 (change time).
3.31 "End of the zone of all restrictions."
Designation of the end of the coverage area at the same time several characters from the following: 3.16, 3.20, 3.22, 3.24, 3.26 - 3.30.
3.32 "The movement of vehicles with dangerous goods is prohibited."
The movement of vehicles equipped with identification signs (information plates) "Dangerous goods" is prohibited.
3.33 "The movement of vehicles with explosive and flammable goods is prohibited."
4. Mandatory signs
4.1.1 "Going straight".
4.1.2 "Move to the right."
4.1.3 "Moving to the left."
4.1.4 "Going straight or to the right."
4.1.5 "Movement straight or left."
4.1.6 "Movement to the right or to the left."
Movement is allowed only in the directions indicated by arrows on the signs. Signs that allow a left turn also allow a U-turn (signs 4.1.1 - 4.1.6 can be used with an arrow configuration corresponding to the required directions of movement at a particular intersection).
Signs 4.1.1 - 4.1.6 do not apply to route vehicles. The effect of signs 4.1.1 - 4.1.6 applies to the intersection of carriageways, in front of which a sign is installed. The effect of the sign 4.1.1, installed at the beginning of the road section, extends to the nearest intersection. The sign does not prohibit right turns into courtyards and other areas adjacent to the road.
4.2.1 "Obstacle avoidance on the right".
4.2.2 "Obstacle avoidance on the left". Detour is allowed only from the side indicated by the arrow.
4.2.3 "Obstacle avoidance on the right or left". Detour is allowed from any side.
4.3 "Roundabout". Movement is allowed in the direction indicated by the arrows.
4.4 "Bicycle path".
Only bicycles and mopeds are allowed. Pedestrians can also move along the cycle path (in the absence of a sidewalk or footpath).
4.5 "Pedestrian path". Only pedestrians are allowed.
4.6 "Minimum speed limit". Driving is allowed only at the specified or higher speed (km/h).
4.7 "End of the minimum speed limit zone".
The movement of vehicles equipped with identification signs (information tables) "Dangerous goods" is allowed only in the direction indicated on the sign: 4.8.1 - straight ahead, 4.8.2 - to the right, 4.8.3 - to the left.
5. Signs of special regulations
Signs of special regulations introduce or cancel certain modes of movement.
5.1 "Motorway".
The road on which the requirements of the Rules apply traffic Russian Federation establishing the order of movement on highways.
5.2 "End of motorway".
5.3 "Road for cars".
A road reserved for the movement of cars, buses and motorcycles only.
5.4 "End of the road for cars."
5.5 "One-way road".
A road or carriageway on which vehicular traffic across its entire width is in the same direction.
5.6 "End of a one-way road."
5.7.1, 5.7.2 "Entering a one-way road". Drive onto a one-way road or carriageway.
5.8 "Reverse movement".
The beginning of a section of road where one or more lanes can change direction.
5.9 "End of reverse movement".
5.10 "Entering the road with reverse traffic."
5.11 "Road with a lane for route vehicles." The road along which the movement of fixed-route vehicles, cyclists and vehicles used as a passenger taxi is carried out along a specially allocated lane towards the general flow of vehicles.
5.12 "The end of the road with a strip for route vehicles."
5.13.1, 5.13.2 "Exit to the road with a lane for route vehicles."
5.14 "Lane for route vehicles". A lane intended for the movement of only fixed-route vehicles, cyclists and vehicles used as a passenger taxi, moving along with the general flow of vehicles.
5.14.2 "Lane for cyclists" - a lane of the carriageway intended for movement on bicycles and mopeds, separated from the rest of the carriageway by horizontal markings and marked with the sign 5.14.2.
5.15.1 "Directions of traffic on lanes".
The number of lanes and permitted directions of movement for each of them.
5.15.2 "Directions of movement along the lane."
Permitted lane directions.
Signs 5.15.1 and 5.15.2, allowing a left turn from the leftmost lane, also allow a U-turn from this lane.
Signs 5.15.1 and 5.15.2 do not apply to route vehicles. The effect of signs 5.15.1 and 5.15.2, installed in front of the intersection, applies to the entire intersection, unless other signs 5.15.1 and 5.15.2, installed on it, give other indications.
5.15.3 "Beginning of the lane".
Beginning of an additional lane on an uphill or deceleration lane. If the sign placed in front of the additional lane shows sign(s) 4.6 "Minimum speed limit", then the driver of the vehicle, who cannot continue driving along the main lane at the specified or higher speed, must change lanes to the right of him.
5.15.4 "Beginning of the lane".
The beginning of the section of the middle lane of a three-lane road intended for traffic in this direction. If the sign 5.15.4 shows a sign prohibiting the movement of any vehicles, then the movement of these vehicles in the corresponding lane is prohibited.
5.15.5 "End of lane". End of an additional lane on the rise or acceleration lane.
5.15.6 "End of lane".
The end of a section of the middle lane on a three-lane road intended for traffic in this direction.
If the sign 5.15.7 shows a sign prohibiting the movement of any vehicles, then the movement of these vehicles in the corresponding lane is prohibited.
Signs 5.15.7 with the appropriate number of arrows may be used on roads with four or more lanes.
5.15.8 "Number of lanes".
Indicates the number of lanes and the lane modes. The driver is obliged to comply with the requirements of the signs on the arrows.
5.16 "Bus and (or) trolleybus stop place".
5.17 "Tram stop place".
5.18 "Place of parking of passenger taxis".
5.19.1, 5.19.2 "Pedestrian crossing".
If there are no markings 1.14.1 or 1.14.2 at the crossing, sign 5.19.1 is set to the right of the road at the near border of the crossing relative to approaching vehicles, and sign 5.19.2 is set to the left of the road at the far border of the crossing.
5.20 "Artificial unevenness".
Indicates the boundaries of artificial unevenness. The sign is installed on the nearest border of artificial unevenness relative to approaching vehicles.
5.21 "Residential area".
The territory on which the requirements of the Rules of the Road of the Russian Federation are in force, establishing the procedure for driving in a residential area.
5.22 "End of residential area".
5.23.1, 5.23.2 "Beginning of settlement".
The beginning of a settlement in which the requirements of the Rules of the Road of the Russian Federation are in force, establishing the order of movement in settlements. 
5.24.1, 5.24.2 "End of settlement".
The place from which the requirements of the Rules of the Road of the Russian Federation, which establish the procedure for driving in populated areas, become invalid on this road.
5.25 "The beginning of the settlement."
The beginning of a settlement where the requirements of the Rules of the Road of the Russian Federation, which establish the procedure for driving in settlements, do not apply on this road.
5.26 "End of settlement".
The end of a built-up area where the requirements of the Rules of the Road of the Russian Federation, which establish the procedure for driving in built-up areas, do not apply on this road.
5.27 "Parking restriction zone".
The place from which the territory (section of the road) begins, where parking is prohibited.
5.28 "End of zone with parking restriction".
5.29 "Regulated parking zone".
The place from which the territory (section of the road) begins, where parking is allowed and regulated using signs and markings.
5.30 "End of regulated parking zone".
5.31 "Zone with a maximum speed limit".
The place from which the territory (section of the road) begins, where the maximum speed is limited.
5.32 "End of the zone with a maximum speed limit."
5.33 "Pedestrian zone".
The place from which the territory (section of the road) begins, on which only pedestrian traffic is allowed.
5.34 "End of the pedestrian zone."
6. Information signs
Information signs inform about the location of settlements and other objects, as well as about the established or recommended driving modes.
6.1 "General maximum speed limits".
General speed limits established by the Rules of the Road of the Russian Federation.
The speed at which traffic is recommended on this section of the road. The zone of action of the sign extends to the nearest intersection, and when sign 6.2 is used in conjunction with a warning sign, it is determined by the length of the dangerous section.
6.3.1 "Place to turn around". Left turns are prohibited.
6.3.2 "Turn area". The length of the turn zone. Left turns are prohibited.
6.4 "Parking place".
6.5 "Emergency stop lane". Emergency stop lane on a steep descent.
6.6 "Underground pedestrian crossing".
6.7 "Elevated pedestrian crossing".
6.8.1 - 6.8.3 "Dead end". A road with no through passage.
6.9.1 "Advance direction indicator"
6.9.2 "Advance direction indicator".
Driving directions to the settlements and other objects indicated on the sign. Signs may bear images of the sign 6.14.1 
, symbols of the highway, airport and other pictograms. On sign 6.9.1, images of other signs informing about the peculiarities of traffic may be applied. The lower part of the sign 6.9.1 indicates the distance from the location of the sign to the intersection or the beginning of the braking lane.
Sign 6.9.1 is also used to indicate the detour of road sections on which one of the prohibition signs 3.11 - 3.15 is installed.
6.9.3 "Movement plan".
The route of movement when certain maneuvers are prohibited at the intersection or permitted directions of movement at a complex intersection.
6.10.1 "Direction indicator"
6.10.2 "Direction indicator".
Driving directions to waypoints. The signs may indicate the distance (km) to the objects marked on them, symbols of the highway, airport and other pictograms.
6.11 "Object name".
The name of an object other than a settlement (river, lake, pass, landmark, etc.).
6.12 "Distance indicator".
Distance (km) to settlements located on the route.
6.13 "Kilometer sign". Distance (km) to the beginning or end of the road.
6.14.1, 6.14.2 "Route number".
6.14.1 - number assigned to the road (route); 6.14.2 - number and direction of the road (route).
6.15.1 - 6.15.3 "Direction of movement for trucks".
6.16 "Stop line".
Place where vehicles stop at a prohibitory traffic light signal (traffic controller).
6.17 "Detour scheme". Detour route for a section of road temporarily closed to traffic.
Detour direction of a section of road temporarily closed to traffic.
6.19.1, 6.19.2 "Preliminary indicator of rebuilding to another carriageway."
Direction to bypass a section of the carriageway closed to traffic on a median road or direction of traffic to return to the right carriageway.
On signs 6.9.1, 6.9.2, 6.10.1 and 6.10.2, installed outside the settlement, a green or blue background means that the movement to the indicated settlement or object will be carried out respectively by motorway or other road. On signs 6.9.1, 6.9.2, 6.10.1 and 6.10.2, installed in a populated area, inserts with a green or blue background mean that movement to the indicated populated area or object after leaving this populated area will be carried out respectively motorway or other road; the white background of the sign means that the specified object is located in this locality.
7. Service marks
Service signs inform about the location of the respective objects.
7.1 "Point of medical aid".
7.2 "Hospital".
7.3 "Gas station".
7.4" Maintenance cars."
7.5 Car wash.
7.6 "Telephone".
7.7 "Food point".
7.8 "Drinking water".
7.9 "Hotel or motel".
7.10 "Camping".
7.11 "Resting place".
7.12 "Road patrol post".
7.13 "Police".
7.14 "International Road Transportation Control Point".
7.15 "Reception area of a radio station transmitting traffic information."
A section of the road on which radio station transmissions are received at the frequency indicated on the sign.
Any firm or company, any premises begins with a plate. A plate on the door of an institution or office from the very first moment of acquaintance with the company emphasizes its image and prestige, and simply helps to orient oneself.
In addition to the information function, plates and signboards can become an effective advertising tool and a distinctive element of the corporate identity of the company.
Types of plates are as follows - information plates, name plates, information signs, facade plates, pointers.
Many people start searching for a manufacturer by searching the Internet for queries:
plate, plate production, whole door plates, buy plates, buy plates, door plates, etc.
But at the same time, few people ask the question - is it a manufacturer or is it an intermediary who does not have equipment at all and will sell you products three times more expensive.
Material and types of plates
There are two main materials from which plates are made - plastic and metal.
plastic plates
Plastic plates can be made by laser engraving on plastic, which has two different colored layers - a thin top layer and a thick layer - the base. In this case, only two colors are possible, but if you have more than 2 colors, then we offer the direct UV printing method (you can read more details below on this page).
Production of plates on plastic happens like this:
The laser burns out the upper layer until the lower main color layer appears. It is very fast and inexpensive when you have no more than 2 colors in your layout.
The thickness of 2-layer plastic can be 1.5 mm for indoor and 3 mm for outdoor. The surface of 3 mm plastic is covered with a protective layer that is resistant to the atmosphere of the city.
The most popular sizes of plates: - 500x400 mm, 400x300 mm, 300x300 mm, 300x200 mm, 300x150 mm, 300x100 mm, 200x100 mm, 150x100 mm, 200x50 mm, the standard size of information signs is 150 x 150 mm.
The size of the products can be any of your choice, but not exceeding the maximum dimensions - 600 x 450 mm.
Mounting methods: the plates are attached to the wall or on the door with a special, high-strength adhesive tape, or with the help of holders or dowels.
A large plastic manufacturer - Rowmark (USA) supplies about 300 types of plastic for laser and mechanical engraving. For ease of choice, all materials for engraving are divided into series, which have their own color range, their thickness and their physical properties.
Unlike cheap 2-ply plastics, Rowmark plastic is of excellent quality, big choice colors and good wear resistance.
View materials for the manufacture of plates from two-layer plastic - samples of 2-layer plastics for engraving.
ritual tablets
Ritual nameplates carry information about those who are buried in the grave.
We produce such plates using engraving technology, they are all durable and do not require updating, it is possible to add decorative and religious elements, frames, photographs, and images.
Please note that finished products are available in only two colors - the background is one color, the text is another, for example, the background is gold, the inscriptions and drawing are black. Below are the most popular colors of plastics. 
The plastic is metallized and looks like metal, while it is a very practical material, it does not deform and perfectly withstands the effects of ultraviolet radiation and external weather conditions in Russia (frost, heat, rain). The made ritual tablet will not lose its original appearance: the image will not be washed off or erased, as it is embedded deep into the plastic. They won't steal it because it's not metal. The most popular products are 30x20 cm and 30x15 cm, but can be optional. The cost of manufacturing ritual tablets depends on the area occupied S. The presence of a frame around the perimeter increases the cost of the plate by 50%. There is also an urgent production within 2 hours upon approval of the layout (check with the managers and depends on the load of the equipment). If you need holes for mounting, please tell me the size of the holes or you can make them yourself with a conventional drill.
metal plates
brass plaque- the most popular type of metal plates, has a polished surface and polished chamfers.
The brass plate is made of polished brass, made in Germany.
It has a polished surface and polished chamfers. Plate thickness 3 mm.
A deep engraving of the picture and text is carried out with the filling of the relief with black or colored enamel.
The image \ text is made by etching or mechanical engraving, with filling the relief with black or colored enamel.
The brass plate is made by us of the polished brass, productions Germany.
Distinctive features brass plates:
- Mirror diamond polished.
- Perfect flat surface.
- Deep color fill.
- Decorative chamfer. Has a polished surface and polished chamfers.
The maximum size of brass products is 500 x 450 mm. Most popular plate sizes(may be different on request):
500x400 mm, 400x300 mm, 300x200 mm, 300x150 mm, 300x100 mm, 150x100 mm, custom size
Mounting methods: on double-sided tape, screws with a decorative cap or remote holders. The plates can be framed with a beautiful and high-quality Nielsen aluminum baguette in various colors.
Term from 10 days depending on complexity.
Outdoor signs (signboards) for institutions
Basically, plates similar to those shown in the photo are ordered government agencies and they are made in the size of 60x80 cm from PVC, framed by the Nelson profile, with anti-vandal outer plexiglass.
The cost of plates depends very much on the circulation or number of pieces, for example, such a plate of 1 piece will cost 4500 rubles, and with a quantity of 10-15 pieces, the cost is already 3000 - 3500 rubles.
Making plastic plates from plastic takes much less time and is cheaper in cost than from brass or other metals. This advantage of this material is used in cases where it is necessary to fulfill an urgent order at a budget price. Light weight, easy to fasten, impact resistant environment, expressive and memorable - and this is only part of the advantages of this type of product.
Plate holders
One of the options is -BULLET LUX anti-vandal holder designed for mounting information plates at a distance from the wall. It consists of two elements: a body attached to the wall and a screw holding the plate. Color gold, silver set 4 pcs.
Many color plates full color printing on any surface
Modern technology that allows you to apply full-color images on any type of surface, such as glass, mirror, plexiglass, wood, plastic, foam board and rolled materials. This is especially in demand when it is necessary to combine several multi-colored images in one product.
Basically, PVC is used as the main material - it is a polymeric material (thermoplastic). PVC is highly resistant to mechanical damage, is a flame-retardant and self-extinguishing material. It is resistant to alkalis, acids, lime, as well as weathering and is absolutely harmless to humans.
Advantages:
special UV curable inks are used, which form a film, which is then firmly fixed on the substrate, i.e. The ink does not penetrate into the structure of the material during printing, but instantly hardens under the influence of UV lamps.
When using UV printing, there is no need for an additional protective laminating film, which significantly saves costs. The image applied to the surface is able to maintain the brightness and saturation of colors for quite a long time, withstand high operating loads, temperature changes, weather events such as snow, rain or solar radiation.
It is also important that, compared to traditional typographic printing, UV (UV) printing can be used completely freely in any interior without fear of harmful fumes.
Our company manufactures OWN PRODUCTIONplates and signboards high quality from various materials: metal, plastic, plexiglass.
The calculation of the cost will mainly be entered on the basis of the total area of the product. If there is a frame - made of 2-layer plastic, the price increases by 50%. If there is a frame made of brass, its price increases by 25%.
You can order the production of plates and signs, and any engraving on plastic in the online store.
We are pleased to offer our clients new service - production of signboards, office plates and indexes, which are made of special two-layer plastic with a thickness of 1.5 mm or 3 mm by laser engraving. Plastics have a pronounced metallic color similar to gold, silver, bronze, copper, steel, nickel.
Plates and signboards made of this plastic do not fade and have a bright and respectable look.
The technology for applying graphic information is laser engraving, which allows you to reproduce information and logos with high accuracy. Signboards and signs can have standard or arbitrary sizes and shapes.
It is very easy to fix the plate to the wall or door - for this you need to use screws or double-sided mounting tape. Also, it is possible to use figured fasteners and decorative elements to fasten the sign at some distance from the wall.
Facade signs are made of plastic for outdoor use, have a hard coating, high resistance to abrasion, corrosion, ultraviolet radiation, humidity.
Below are the main colors of plastic for the manufacture of signs and plates:
Internal office signs and signs.
Office plates, signboards and signs of this series are manufactured made of two-layer metal-colored plastics for internal or external use, depending on the operating conditions. The thickness of the plastics is 1.5 mm. The plates are lightweight and can be easily fixed with double-sided adhesive tape without the use of special tools.
The price for the manufacture of plates is 2.5 rubles per square cm of the product. For example, a plate 20cm x 30cm = 600x2.5 = 1500 rubles.
Plaques and signs are made from high-quality two-layer plastic for laser engraving from Rowmark (USA).
For the production of plates, it is necessary to provide a layout or information about the size and content of the plates. Layouts are accepted in in electronic format, and by phone indicating the information and dimensions of the plate. The designers of our company will send you a ready-made layout for approval, and after the order is approved, we we will make signs for you within 2-3 hours, depending on the workload of the equipment. Rush production available at no extra cost
We have been developing and manufacturing for Russia and the world for 15 years. In 2019, the team grew to 75 specialists, and the company's area to 1500 m2. We are constantly improving processes and expanding.
1. Quality management system GOST R ISO 9001-2015.
2. Checking the QCD of each manufactured product.
3. Replacement of marriage without questions and with delivery at our expense.
Optimal prices
Always looking for ways to reduce the cost for you both through technology and materials. We have been keeping prices at the same level for 5 years due to growing production volumes.
Everything in one company: printing and coating, mechanical and laser processing, electronics. As experts in production, we will help you make the right choice for solving your problems.
The average production time for 2019 is 5 days. We will ship part of the batch in advance. We do not hide our heads in the sand in case of force majeure and are ready to compress deadlines. Warehouse hundreds of kinds of raw materials weighing more than 10 tons.
We develop designs, electronics, 3D models. We prepare prototypes, test, improve finished products. We are able to solve non-standard tasks.
Companies have entrusted us with the manufacture of their products
Working days - average order lead time in 2019
Customers are satisfied with the quality of our products
According to the results of weekly surveys.
our clients
Our signs are seen by millions of people across the country.
Show more
Delivery of plates in Russia, the CIS and the EAEU
We work with any transport companies.
We deliver to the point of issue or to the door.
Free shipping to the points of issue of TC IML in MSC and St. Petersburg.
We carefully pack the delivered products We use parchment, polystyrene, branded tape,
ziplocks, elastic bands and bubble wrap.
Typical delivery times for products*
- Moscow and the region - 1-2 days
- St. Petersburg - 1-3 days
- Central Russia - 1-3 days
- Ural, Siberia and Far East - from 2 days
* Check with managers for deadlines.
Label layout requirements
We work in CorelDraw (.cdr) in CMYK colors. If you do not have a layout - it does not matter, send what you have. Remember: the more accurately it will be transmitted appearance products, the faster we can make it.
Vector
More
Collapse
We work with CorelDraw, Adobe Illustrator, SolidWorks, Autodesk Inventor, Compass 3D, STEP and STP formats. Keep text editable along with the attached font. Make sure there are no text errors in the layout.
Download example
Drawing
More
Collapse
On the drawing, indicate the overall dimensions of the product, the dimensions of all elements (holes, samples, chamfers, graphic elements), their location. It is desirable that the drawing meets the requirements of ESKD.
Download example
Scan
More
Collapse
If you have a sample of the finished product and it can be placed in the scanner, then send scans. scans better photo convey the dimensions and colors of the desired product. Perform scans at a resolution of 300 DPI.
Download example
Photo
More
Collapse
Try to take a photo in high resolution so that the product is located in the center of the frame, and not on the side. Full face. If the sample fits in the scanner, then send the scan.
Download example
Drawing
More
Collapse
Draw how you see your future product, indicate the overall dimensions, the desired font and the color scheme in which it should be made.
Download example
Stages of work
What is important to know when ordering plates
Consider the terms and conditions of use.
All materials and application methods have their own service life. There is nothing eternal and over time, any material is destroyed. "Stressing" factors for plates: moisture (rain, snow, water), UV radiation, aggressive substances (acids, alkalis).
For example, the application of a film on a PVC plate is one of the most budgetary options for making plates. But! The service life of a self-adhesive film is on average up to 3 years. Plus, since this is an application, the film is glued to the surface of the plastic and is not protected from vandalism. Therefore, such a plate is an excellent temporary option, if we talk about street conditions, and it will work on a permanent basis if you need a plate for the office.
Consider another option, UV printing on composite. The composite is a sheet material, aluminum with a polymeric color coating on the edges, plastic in the center. Thanks to this design, it is light and strong enough, while maintaining a low cost. UV printing is not afraid of moisture and sunlight, only a rough abrasive effect can spoil such an image. Therefore, a composite sign is an ideal solution for budget street signs. This is often done in the manufacture of warning signs and safety signs.
If you have a drawing, provide it first.
If you have special requirements, state them at the beginning of the conversation. The more complete the list of requirements for the plate, the more effective the interaction with the manager will be.
If you have a Brand Book - inform the manager at the material selection stage
Getting the color to a certain specified shade is a separate task for production. Each material has its own texture and color. Each printing method works in its own way. color scheme. For example, powder paints are supplied in RAL colors. If according to the Brand Book the color is specified in Pantone, and you want a plate painted with powder, the manager will inform you that it is a great success to find an identical shade in RAL.
When agreeing on a color, you can always make a color proof. It will allow you to determine the final shade and select the equipment settings to order.
Plan to order signs in advance
Our company provides an urgent production option. If you need to be in time for a specific date, we are ready to make every effort to make the plates on time. But you must understand that in this case, firstly, the number of options for technologies and materials will be reduced. For each technology, the production cycle takes a certain time, which cannot be reduced. Secondly, the price for urgent production is higher. And thirdly, if samples are required, we will not have time to make them.
If you did not find an example plate among our options
Connect manager. Perhaps we did something similar and the manager will send photos of examples. If not, we are ready to experiment!
New road signs introduced 01.2006
1. "Parking Restricted Zone" Signs.Will be installed on road sections with limited parking. The sign on the right shows zone cancellation.
2. Signs "Zone with maximum speed limits."
They are installed within the boundaries of the site on which they operate.
3. Signs "Pedestrian zone"
indicate areas where only pedestrian traffic is allowed.
4. Signs "Regulated parking zone"
indicate the method of parking and the duration of the sign.
5. Signs "Locality"
will tell the driver that it is necessary to lower / t / dorogi_rossii / speed up to 60 km / h.
6. Sign "Direction of turn"
will indicate the direction of the detour.
7. Sign "Artificial unevenness"
means "speed bump".
8. Sign "Congestion"
warn drivers of traffic jams.
9. Sign "Dangerous roadside"
put where it is better not to leave the road.
10. Sign "Intersection with a secondary road"
help you find a country road.
11. Sign "Turn right (left)"
indicate the direction of movement.
12. Sign "Control"
will appear at police posts, entrances to border and closed territories, as well as on toll roads. Stop required!
13. Sign "Beach or pool"
indicate where you can refresh yourself.
14. Sign "Radio communication zone with emergency services"
will tell you which radio channel owners of portable civil radio stations should switch to.
15. Sign "Reception area of a radio station transmitting traffic information"
If you have a shortwave radio installed in your car, then you need to switch to the specified frequency to communicate.
16. Sign "General maximum speed limits"
will appear at all entrances to Russia and will inform visitors about speed limits on our roads.
17. Plates "Type of route vehicle"
will be installed at "intercepting" parking lots and tell drivers what to drive next.
warning signs
|
Warning signs inform drivers that they are approaching a dangerous section of the road, the movement of which requires the adoption of measures appropriate to the situation. |
|||||||
|
|
|
||||||
|
|
|
||||||
|
Designation of a crossing not equipped with a barrier |
|||||||
Approaching a railroad crossing |
|||||||
|
|
|
||||||
|
|
|
||||||
|
|
|
||||||
|
"Dangerous turn" |
|||||||
|
"Dangerous Turns" |
|||||||
|
|
|
||||||
|
|
|
||||||
|
|
|
||||||
|
|
"Road narrows" Narrowing on both sides |
||||||
|
|
|
||||||
|
|
|
||||||
|
|
|
||||||
|
|
|
||||||
|
|
|
||||||
|
|
|
||||||
|
|
|
||||||
|
"Turn Direction" |
|
||||||
|
Warning signs 1.1, 1.2, 1.5 - 1.33 outside settlements are installed at a distance of 150 - 300 m, in settlements - at a distance of 50 - 100 m before the beginning of the dangerous section. If necessary, signs can be installed at a different distance, which in this case is indicated on the plate 8.1.1. Signs 1.13 and 1.14 can be installed without plate 8.1.1 immediately before the start of the descent or ascent, if the descents and ascents follow one another. Sign 1.25 during short-term work on the roadway can be installed without plate 8.1.1 at a distance of 10 - 15 m to the place of work. Sign 1.32 is used as a temporary or in signs with a variable image in front of the intersection, from where it is possible to bypass the section of the road where the traffic jam has formed. Outside settlements, signs 1.1, 1.2, 1.9, 1.10, 1.23 and 1.25 are repeated. The second sign is installed at a distance of at least 50 m before the beginning of the dangerous section. Signs 1.23 and 1.25 are also repeated in settlements directly at the beginning of the dangerous section. |
|||||||
Priority signs
|
Priority signs prioritize crossings, crossings of carriageways or narrow sections of the road. |
|||
|
|
|
||
|
|
"Secondary Road Junction" |
||
|
|
|
||
|
|
|
||
prohibition signs
|
Prohibition signs introduce or cancel certain traffic restrictions. |
|
|
"No entry" |
"Movement Prohibition" |
|
"The movement of mechanical |
"Trucks prohibited" |
|
"No motorcycles allowed" |
"Movement of tractors is prohibited" |
|
"Towing a trailer is prohibited" |
"The movement of horse-drawn carts is prohibited" |
|
"Bicycles are not allowed" |
"No Pedestrians" |
|
"Weight limit" |
"Weight limitation, |
|
"Height limit" |
"Limit Width" |
|
"Length limit" |
"Minimum Distance Limit" |
|
"Customs" |
"Danger" |
|
"Control" |
|
|
"No Right Turn" |
"No left turn" |
|
"No U-turn" |
|
|
"No Overtaking" |
"End of No Overtaking Zone" |
|
"Overtaking by trucks is prohibited" |
"End of No Overtaking Zone for Trucks" |
|
"Max Speed Limit" |
"End of the maximum limit zone |
|
"Beeping prohibited" |
|
|
"Stop prohibited" |
"No parking" |
|
"Parking prohibited on odd |
"Parking prohibited on even |
|
With the simultaneous use of signs 3.29 and 3.30 on opposite sides of the carriageway, parking is allowed on both sides of the carriageway from 19:00 to 21:00 (change time). |
|
|
"End of the zone of all restrictions" |
|
|
|
"The movement of vehicles from |
|
Signs do not apply: 3.2 - 3.8 - for vehicles of federal postal organizations that have a white diagonal stripe on a blue background on the side surface, and vehicles that serve enterprises located in a designated area, as well as serve citizens or belong to citizens living or working in a designated area . In these cases, vehicles must enter and exit the designated area at the intersection closest to their destination; 3.28 - 3.30 - for vehicles of federal postal organizations that have a white diagonal stripe on a blue background on the side surface, as well as for taxis with a taximeter turned on; 3.2, 3.3, 3.28 - 3.30 - for vehicles driven by disabled people of groups I and II or carrying such disabled people. The effect of signs 3.18.1, 3.18.2 applies to the intersection of carriageways in front of which the sign is installed. The coverage area of signs 3.16, 3.20, 3.22, 3.24, 3.26 - 3.30 extends from the place where the sign is installed to the nearest intersection behind it, and in populated areas in the absence of an intersection - to the end of the populated area. The action of the signs is not interrupted at the places of exit from the territories adjacent to the road and at the places of intersection (adjacency) with field, forest and other secondary roads, in front of which the corresponding signs are not installed. The effect of the sign 3.24, installed in front of the settlement, indicated by the sign 5.23.1 or 5.23.2, extends to this sign. The area of effect of signs can be reduced: |
|
Mandatory signs
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Movement is allowed only in the directions indicated on the signs |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
"Circular motion" |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
"Bicycle lane" |
"Footpath" |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
"Minimum speed limit" |
"End of restricted zone |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Signs of special regulations
Information signs
On signs 6.9.1, 6.9.2, 6.10.1 and 6.10.2, installed outside the settlement, a green or blue background means that the movement to the indicated settlement or object will be carried out respectively by motorway or other road. On signs 6.9.1, 6.9.2, 6.10.1 and 6.10.2, installed in a populated area, inserts with a green or blue background mean that movement to the indicated populated area or object after leaving this populated area will be carried out respectively motorway or other road; the white background of the sign means that the specified object is located in this locality. Service marks
Signs of additional information (plates)
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
